Apprentice Service/Installation Engineer

We’re looking for an apprentice engineer to join our family-owned and operated pump maintenance and installation company on a full-time basis with day release to college to complete a 3-year course. The role encompasses a wide discipline, and knowledge will be gained in both electrical and mechanical fields.

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you'll do at work

• Servicing and maintaining a wide range of water and wastewater pumping equipment and controls systems
• Responding to emergency breakdowns of aforementioned equipment to fault find and identify electrical and mechanical failures
• Installation, commissioning, and testing of new pumping systems on site
• Fabrication and manufacture of pumping systems and pipework manifolds in our Leeds works
• Repair of pumps and control systems in our Leeds works

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

Course contents

• Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
• Use planning, prioritising, organising, and time management techniques to plan tasks.
• Identify and organise resources to complete tasks. For example, consumables.
• Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
• Identify equipment to work on. Check plant configuration is as defined.
• Prepare the work area for maintenance tasks.
• Identify environmental and health and safety hazards and risks and apply control measures.
• Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
• Follow security procedures. For example, site access, document classification, and securing assets.
• Follow emergency incident and response procedures.
• Apply sustainability principles. For example, minimising waste.
• Segregate items for reuse, recycling, and waste.
• Use mathematical principles and formulae to support engineering maintenance.
• Apply engineering maintenance standards and procedures.
• Apply foreign material exclusion procedures.
• Follow maintenance tools and equipment control procedures. For example, handling and storage.
• Reinstate the work area.
• Apply team working principles.
• Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
• Escalate issues outside limits of responsibility.
• Record information.
• Produce or amend documents. For example, handover notes and reports.
• Identify and highlight issues (red pen), with technical drawings.
• Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
• Apply continuous improvement techniques to identify improvement suggestions.
• Carry out and record planned and unplanned learning and development activities.
• Electrical and control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
• Electrical and control and instrumentation. Select, check, and use electrical maintenance tools, measurement, and test equipment. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
• Electrical and control and instrumentation. Use electrical diagnostic equipment and apply fault finding and rectification techniques. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
• Electrical and control and instrumentation. Apply problem solving and critical reasoning techniques.
• Electrical and control and instrumentation. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
• Electrical and control and instrumentation. Remove and replace electrical parts.
• Electrical and control and instrumentation. Prepare and terminate electrical cables.
• Electrical and control and instrumentation. Set up and adjust electrical aspects of plant.
• Electrical and control and instrumentation. Clean parts. For example, removal of dust and debris.
• Electrical and control and instrumentation. Conduct and confirm electrical and connected services isolation and deisolation.
• Electrical and control and instrumentation. Conduct functional testing.
• Electrical and control and instrumentation. Inspect and test control and instrumentation systems.
• Electrical and control and instrumentation. Check calibration and make adjustments.
• Electrical and control and instrumentation. Check loop function.
• Electrical and control and instrumentation. Set up and adjust control and instrumentation systems.
• Electrical and control and instrumentation. Remove and replace instruments and sensors.
• Electrical and control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
• Electrical and mechanical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
• Electrical and mechanical. Conduct and confirm electrical and connected services isolation and deisolation.
• Electrical and mechanical. Select, check, and use electrical and mechanical maintenance tools, measurement, and test equipment.
• Electrical and mechanical. Use electrical and mechanical diagnostic equipment and apply fault finding and rectification techniques.
• Electrical and mechanical. Apply problem solving and critical reasoning techniques.
• Electrical and mechanical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
• Electrical and mechanical. Remove and replace electrical parts.
• Electrical and mechanical. Prepare and terminate electrical cables.
• Electrical and mechanical. Set up, align, and adjust electrical aspects of plant.
• Electrical and mechanical. Clean parts. For example, removal of dust and debris.
• Electrical and mechanical. Conduct functional testing.
• Electrical and mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
• Electrical and mechanical. Remove and replace mechanical parts.
• Electrical and mechanical. Examine mechanical parts for defects. For example, pump seals.
• Electrical and mechanical. Set up, align, and adjust mechanical aspects of plant.
• Electrical and mechanical. Lubricate mechanical assemblies.
• Electrical and mechanical. Apply bench fitting techniques.
• Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
• Use planning, prioritising, organising, and time management techniques to plan tasks.
• Identify and organise resources to complete tasks. For example, consumables.
• Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
• Identify equipment to work on. Check plant configuration is as defined.
• Prepare the work area for maintenance tasks.
• Identify environmental and health and safety hazards and risks and apply control measures.
• Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
• Follow security procedures. For example, site access, document classification, and securing assets.
• Follow emergency incident and response procedures.
• Apply sustainability principles. For example, minimising waste.
• Segregate items for reuse, recycling, and waste.
• Use mathematical principles and formulae to support engineering maintenance.
• Apply engineering maintenance standards and procedures.
• Apply foreign material exclusion procedures.
• Follow maintenance tools and equipment control procedures. For example, handling and storage.
• Reinstate the work area.
• Apply team working principles.
• Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
• Escalate issues outside limits of responsibility.
• Record information.
• Produce or amend documents. For example, handover notes and reports.
• Identify and highlight issues (red pen), with technical drawings.
• Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
• Apply continuous improvement techniques to identify improvement suggestions.
• Carry out and record planned and unplanned learning and development activities.