Find an apprenticeship
Pyrometry Apprentice
How your CV stacks up
Upload your CV to see how well it fits this job role
?%
An exciting opportunity for a motivated individual to begin an Apprenticeship in Pyrometry Engineering within an aerospace manufacturing environment.
This role will provide structured training, hands-on experience, and industry-recognised development in temperature measurement, calibration, and process control which are key disciplines.
Technical Competence
- Develop an understanding of thermocouple types, selection, and applications
- Build knowledge of key aerospace standards and customer specifications
- Carry out pyrometry instrumentation calibration activities
- Perform System Accuracy Tests (SATs)
- Set up and conduct Temperature Uniformity Surveys (TUSs) in accordance with dimensional drawings
- Develop an understanding and operate multiple Pyrometry Control Systems, electrical and gas driven across various temperature ranges
Systems & Process Knowledge
- Gain experience of Area Control and Recording Systems across different software platforms
- Produce accurate and detailed calibration and test reports, including as found and as left results
- Develop an understanding of preventative maintenance and scheduling systems
Problem Solving & Continuous Improvement
- Learn how to fault-find, diagnose, and resolve technical issues
- Support continuous process improvement initiatives
- Assist in project planning and execution
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
Course contents
- Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
- Use planning, prioritising, organising, and time management techniques to plan tasks.
- Identify and organise resources to complete tasks. For example, consumables.
- Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
- Identify equipment to work on. Check plant configuration is as defined.
- Prepare the work area for maintenance tasks.
- Identify environmental and health and safety hazards and risks and apply control measures.
- Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
- Follow security procedures. For example, site access, document classification, and securing assets.
- Follow emergency incident and response procedures.
- Apply sustainability principles. For example, minimising waste.
- Segregate items for reuse, recycling, and waste.
- Use mathematical principles and formulae to support engineering maintenance.
- Apply engineering maintenance standards and procedures.
- Apply foreign material exclusion procedures.
- Follow maintenance tools and equipment control procedures. For example, handling and storage.
- Reinstate the work area.
- Apply team working principles.
- Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
- Escalate issues outside limits of responsibility.
- Record information.
- Produce or update documents. For example, handover notes and reports.
- Identify and highlight issues (red pen) with technical drawings.
- Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
- Apply continuous improvement techniques to identify improvement suggestions.
- Carry out and record planned and unplanned learning and development activities.
Reasons to use Rodeo
Start with a chat, not a search bar
Grad scheme, placement, apprenticeship? Not sure what you want yet — that's fine. Your agent talks it through with you and turns "I have no idea" into a shortlist.
It searches the market for you
Every day your agent scans the market matching roles against what actually matters to you, not just keywords on a CV.
Only hits
No noise. No "maybe this fits." Just roles with a clear explanation of why they're right — and where to focus when applying.
Electrical
- Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
- Select, check, and use electrical maintenance tools, measurement, and test equipment.
- Use electrical diagnostic equipment and apply fault finding and rectification techniques.
- Apply problem solving and critical reasoning techniques.
- Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
- Remove and replace electrical parts.
- Prepare and terminate electrical cables.
- Set up, align and adjust electrical aspects of plant.
- Clean parts. For example, removal of dust and debris.
- Conduct and confirm electrical and connected services deisolation.
- Conduct functional testing.
Control and instrumentation
- Conduct and confirm safe isolation of connected services
- Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
- Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
- Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
- Apply problem solving and critical reasoning techniques.
- Inspect and test control and instrumentation systems.
- Check calibration and make adjustments.
- Check loop function.
- Set up and adjust control and instrumentation systems.
- Clean parts. For example, removal of dust and debris.
- Remove and replace instruments and sensors.
- Re-connect instrumentation power supply, cables, pipework, and services.
- Conduct and confirm electrical and connected services deisolation.
- Conduct functional testing.
Mechanical
- Check and confirm safe isolation of connected services.
- Select, check, and use mechanical maintenance tools and equipment.
- Use mechanical diagnostic equipment and apply fault finding and rectification techniques.
- Apply problem solving and critical reasoning techniques.
- Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
- Remove and replace mechanical parts.
- Examine mechanical parts for defects. For example, pump seals.
- Set up, align, and adjust mechanical aspects of plant.
- Clean parts. For example, removal of dust and debris.
- Lubricate mechanical assemblies.
- Confirm electrical and connected services deisolation.
- Conduct functional testing.
- Apply bench fitting techniques.
Get help with your application
Your very own career expert that helps elevate your application to the next level.
Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
Use planning, prioritising, organising, and time management techniques to plan tasks.
Identify and organise resources to complete tasks. For example, consumables.
Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
Identify equipment to work on. Check plant configuration is as defined.
Prepare the work area for maintenance tasks.
Identify environmental and health and safety hazards and risks and apply control measures.
Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
Follow security procedures. For example, site access, document classification, and securing assets.
Follow emergency incident and response procedures.
Apply sustainability principles. For example, minimising waste.
Segregate items for reuse, recycling, and waste.
Use mathematical principles and formulae to support engineering maintenance.
Apply engineering maintenance standards and procedures.
Apply foreign material exclusion procedures.
Follow maintenance tools and equipment control procedures. For example, handling and storage.
Reinstate the work area.
Apply team working principles.
Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
Escalate issues outside limits of responsibility.
Record information.
Produce or update documents. For example, handover notes and reports.
Identify and highlight issues (red pen) with technical drawings.
Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
Apply continuous improvement techniques to identify improvement suggestions.
Carry out and record planned and unplanned learning and development activities.
Your earnings can increase over time with an apprenticeship. Find out about potential future pay (opens in new tab).
Full time position with the company.
“It took my CV and asked me questions relevant to understanding what kind of jobs to suggest for me. Suggestions were almost perfect. Jobs were exactly what I’ve been looking for.”
Jessica, London
Skills