Find an apprenticeship
Vehicle Damage Mechanical, Electrical, and Trim Apprenticeship - M&A Coachworks London Porsche
How your CV stacks up
Upload your CV to see how well it fits this job role
?%
Vehicle Damage Mechanical, Electrical and Trim (MET) Technician (Level 3) Apprenticeship
This exciting opportunity is ideal for someone looking for a structured, supportive, and challenging apprenticeship.
The role involves removing and refitting damaged mechanical and electrical components on a car before and after body repair work has been carried out.
Wage
- £16,640 for your first year, then could increase depending on your age
- National Minimum Wage rate for apprentices
- [Minimum wage rates](opens in new tab)
Training Course
- Vehicle damage mechanical, electrical and trim (MET) technician (level 3)
Hours
- A typical working week could be 40 hours Monday to Friday 8.30am to 5.30pm, however, your exact hours will be confirmed at a face-to-face interview.
- 40 hours a week
Start Date
- Monday 5 October 2026
Duration
- 3 years
Positions Available
- 1
What You'll Do at Work
- Ability to undertake appropriate job preparation prior to commencing repair, e.g., disarming airbags, undertaking electrical safety precautions, and conducting pre-repair diagnostics sweeps.
- Ability to interpret relevant technical data, specification, and methods will enable appropriate pre-preparation prior to work being carried out.
- Ability to remove, repair, and replace the engine, gearbox, suspension, mechanical and electrical systems, related autonomous items from the vehicle safely, e.g., Anti-lock Braking System units, safety restraint systems, Radio Detection and Ranging (RADAR) & Light Detection And Ranging (LIDAR) semi-autonomous components.
- Ability to diagnose and fix faults within a vehicle management system (onboard computer) & associated electrical system.
- Ability to identify and communicate supplementary parts where required.
- Ability to identify and operate the correct repair tools, equipment, and devices used in the process such as Geometry Wheel Aligners for alignment of the wheels, diagnostic hardware to establish any faults with the vehicle, and establish if parts are replaced or re-calibrated, utilising torque wrenches to tighten nuts/bolts to the manufacturer recommendations.
- Ability to rebuild vehicles post-repair and reinstate safety-critical systems including safety restraint systems, airbags, seat belts and pretensions, Advanced Driver Assistance Systems, cameras, Radio Detection and Ranging (RADAR) systems, and Light Detection And Ranging (LIDAR) systems including collision avoidance technology.
- Qualified in refrigerant handling to EC842 2006 or the most up-to-date revision of this legislative requirement to enable the repair or replacement of air condition/climate control parts such as condensers, evaporator compressor pump.
Reasons to use Rodeo
Start with a chat, not a search bar
Grad scheme, placement, apprenticeship? Not sure what you want yet — that's fine. Your agent talks it through with you and turns "I have no idea" into a shortlist.
It searches the market for you
Every day your agent scans the market matching roles against what actually matters to you, not just keywords on a CV.
Only hits
No noise. No "maybe this fits." Just roles with a clear explanation of why they're right — and where to focus when applying.
Where You'll Work
- 135 Highgate Road
- London
- NW5 1LE
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
Training Provider
- CALEX UK LTD
Training Course
- Vehicle damage mechanical, electrical, and trim (MET) technician (level 3)
What You'll Learn
Course Contents
- Ability to undertake appropriate job preparation prior to commencing repair, e.g., disarming airbags, undertaking electrical safety precautions, and conducting pre-repair diagnostics sweeps.
- Ability to interpret relevant technical data, specification, and methods will enable appropriate pre-preparation prior to work being carried out.
- Ability to remove, repair, and replace Engine, gearbox, suspension, mechanical and electrical systems, related autonomous items from the vehicle safely, e.g., Anti-lock Braking System units, safety restraint systems, Radio Detection and Ranging (RADAR) & Light Detection And Ranging (LIDAR) semi-autonomous components.
- Ability to diagnose and fix faults within a vehicle management system (onboard computer) & associated electrical system.
- Ability to identify and communicate supplementary parts where required.
- Ability to identify and operate the correct repair tools, equipment, and devices used in the process such as Geometry Wheel Aligners for alignment of the wheels, diagnostic hardware to establish any faults with the vehicle, and establish if parts are replaced or re-calibrated, utilising torque wrenches to tighten nuts/bolts to the manufacturer recommendations.
- Ability to rebuild vehicles post-repair and reinstate safety-critical systems including Safety Restraint Systems, airbags, seat belts and pretensions, Advanced Driver Assistance Systems, cameras, Radio Detection and Ranging (RADAR) systems, and Light Detection And Ranging (LIDAR) systems including collision avoidance technology.
- Qualified in refrigerant handling to EC842 2006 or the most up-to-date revision of this legislative requirement to enable the repair or replacement of air condition/climate control parts such as condensers, evaporator compressor pump.
Get help with your application
Your very own career expert that helps elevate your application to the next level.
Training Schedule
- The Programme typically lasts for 36 months dependant on the career path chosen, and you'll achieve a nationally recognised qualification.
- Block training at our state-of-the-art facility in Slough is complemented by a combination of regular coaching visits from one of our experienced Coaches as well as Virtual Classroom sessions and E-Learning modules.
Essential Qualifications
- GCSE in:
- English (grade 4)
- Maths (grade 4)
Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.
Skills
- Communication skills
- IT skills
- Attention to detail
- Organisation skills
- Problem-solving skills
- Analytical skills
- Team working
About This Employer
At Steer, our people are our strength, which is why we are keen to give you the opportunity to grow and develop your career as we build an innovative and sustainable company. At Steer, we reward hard work and talent.
After This Apprenticeship
Your earnings can increase over time with an apprenticeship. Find out about potential future pay.
There are lots of opportunities to develop your career within our expanding business. Your early development is carefully mapped through your apprenticeship journey with your learning focused toward achieving an industry-recognised qualification.
Ask a Question
The contact for this apprenticeship is:
- CALEX UK LTD
The reference code for this apprenticeship is VAC2000045423.
Apply Now
Closes on Tuesday 1 September 2026
After signing in, you’ll apply for this apprenticeship on the company's website.
“It took my CV and asked me questions relevant to understanding what kind of jobs to suggest for me. Suggestions were almost perfect. Jobs were exactly what I’ve been looking for.”
Jessica, London
Skills