Find an apprenticeship
Welding Apprenticeship (Plate)
How your CV stacks up
Upload your CV to see how well it fits this job role
?%
A fantastic opportunity for a Midland resident to become a qualified Welder in the construction industry through working for a leading specialist contractor, J. Reddington. We offer opportunity and support to develop and learn. The candidate will support our welding operations in our Nottingham based factory operations.
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you'll do at work
You will:
- Produce good quality welds using two welding process/material type combinations (TIG, MMA, MIG/MAG, FCAW) and (Carbon and Low Alloy steel, High Alloy Ferritic/Martensitic Steel, Austenitic Stainless Steel, Nickel and Nickel Alloys, Aluminium and Aluminium Alloys) in two welding positions (Downhand, Horizontal, Vertical, Overhead).
- Achieve a quality of work to meet international standards for dimensional and surface inspection (Visual, Magnetic Particle Inspection and Dye Penetrant Inspection).
- Position, prepare and check the welding equipment.
- Receive, handle and maintain consumables.
- Prepare, check and protect materials and work area ready for welding.
- Complete and check the finished weld ready for inspection and report into the production control system.
- Ensure that health and safety requirements are fully accounted for in all the above.
- Be aware of the basic mechanical properties and weldability of welded materials.
- Understand the common arc welding processes, joint types (fillet, lap, butt, etc.) and positions.
- Understand the major components of welding equipment and the essential parameters for welding.
- Understand the terminology, operation and controls for the selected arc welding processes, joint types and welding positions.
- Identify and understand the causes of typical welding defects and how their occurrence can be reduced, for the materials and welding processes selected.
- Understand the functions of welding consumables and the requirements for correct storage and handling.
- Be able to identify and select correct welding consumables for each application.
- Understand and identify hazards and basic health, safety and quality requirements when welding.
- Know how to interpret and work to a welding procedure specification.
- Know the basics of welding quality documents and reporting systems.
- Be able to apply different welding methods as well as other workshop operations like burning, grinding and repairing piling tools.
Reasons to use Rodeo
Start with a chat, not a search bar
Grad scheme, placement, apprenticeship? Not sure what you want yet — that's fine. Your agent talks it through with you and turns "I have no idea" into a shortlist.
It searches the market for you
Every day your agent scans the market matching roles against what actually matters to you, not just keywords on a CV.
Only hits
No noise. No "maybe this fits." Just roles with a clear explanation of why they're right — and where to focus when applying.
Where you'll work
JRL Group
3 Private Rd
Nottingham
NG4 2GB
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
Training provider
HERTFORD REGIONAL COLLEGE
Training course
Plate welder (level 3)
Understanding apprenticeship levels (opens in new tab)
What you'll learn
Course contents
- Work safely at all times, comply with health, safety and environmental legislation, regulations and organisational requirements.
- Can obtain, check and use appropriate documentation (such as job instructions, drawings, quality control documentation).
- Plan and prepare welding activities before commencing the work.
- Obtain, position and assemble welding equipment and associated safety protection needed for activity.
- Prepare, check and protect materials and work areas ready for welding.
- Inspect assembly to be welded and undertake remedial work to comply with specification, or implement quality steps if rejected.
- Receive, inspect, condition and maintain consumables.
- Set, test and monitor key welding parameters as detailed within the Welding Procedure Specification.
- Deal promptly and effectively with problems within the limits of their responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnel.
- Use manual processes and equipment to remove material (powered and non-powered).
- Achieves a quality of work to meet international standards e.g. ISO5817, ISO9606, ASME IX, AWS D1.1 for dimensional, surface inspection (e.g. Visual, Magnetic Particle, Dye Penetrant) and volumetric inspection (e.g. Radiography, Ultrasonic inspection).
- Complete progressive and final checks on the weld prior to release for formal inspection and report into the production control system at the appropriate stages of the work activity.
- Restore the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location.
- Produce welds in plate and/or structural components using two welding processes from TIG, PAW, MMA, MIG/MAG, FCAW.
- Produce welds in plate and/or structural components using two materials from Carbon Steel, Low Alloy Steel, High Alloy Ferritic/Martensitic Steel, Austenitic Stainless Steel, Nickel & Nickel Alloys, Aluminium & Aluminium alloys, Titanium & Titanium Alloys, Copper & Copper Alloys.
- Produce welds in plate and/or structural components covering three plate welding positions which must include Vertical (either upward or downward progression) and overhead.
- Produce plate welds in 3 main joint configurations (Single or Double Sided Butt, Single or Double Sided T-Butt & Fillet)
Get help with your application
Your very own career expert that helps elevate your application to the next level.
Training schedule
Additional short courses and internal training programmes
Desirable qualifications
- GCSE in:
- English (grade 4)
- Maths (grade 4)
Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.
Other requirements
A CSCS card is advantageous.
The JRL Group encompasses 35+ divisions delivering bespoke solutions for the most complex construction projects. We offer managed integrated construction solutions, with an annual turnover in excess of over £800m. Our portfolio of exciting projects include the Landmark Pinnacle, refurbishment of Regents Crescent and Royal Mint Gardens. We take pride in our diverse, flexible and skilled workforce, giving our people opportunities and confidence to innovate and succeed.
Your earnings can increase over time with an apprenticeship. Find out about potential future pay (opens in new tab).
Qualified Welder.
The contact for this apprenticeship is:
J. REDDINGTON LTD
Urte Sonnenberg
urte.sonnenberg@jrlgroup.co.uk
+442089537800
The reference code for this apprenticeship is VAC2000047741.
“It took my CV and asked me questions relevant to understanding what kind of jobs to suggest for me. Suggestions were almost perfect. Jobs were exactly what I’ve been looking for.”
Jessica, London
Skills