Interior Systems Apprenticeship Level 2

Interior Systems operatives work in construction, installing, repairing and maintaining internal walls, partitions and ceilings on projects from homes to iconic sites. They work with site teams in active or occupied buildings, often at height, following strict safety standards, with strong career progression.

What you'll do at work

• Works within the Construction and Built Environment sector
• Specialises in installing, repairing and maintaining internal walls, partitions and ceilings
• Involved in projects ranging from homes to large commercial and iconic buildings
• Works alongside other trades, supervisors, managers and contractors
• Operates in construction sites or occupied buildings
• Physically demanding role, often involving work at height
• Follows strict health and safety procedures at all times
• Offers strong career progression into supervision, management or self-employment

Where you'll work

26 Beechwood Road
Chudleigh
Newton Abbot
TQ13 0JE

Training course

Interior systems installer (level 2)

What you'll learn

Course contents

• Measure and set out from drawings provided and check vertical and horizontal datum
• Select the appropriate materials, tools and equipment in accordance with the specification requirements and or manufacturer specific instructions
• Safely and correctly operate tools and equipment, plant and machinery appropriate for use. (e.g. scaffold, MEWPS, nail gun, circular saw, lasers)
• Apply fire and acoustic mastic seals in accordance with specification, designs details and manufacturers recommendations
• Accurately measure and cut components (e.g. metal sections, plasterboard, insulation, timber and plywood)
• Appropriately fix all components according to specifications and/or drawings
• Effectively protect surround surfaces and segregate work areas and cutting areas
• Install dry lining systems to metal and stud partitions framed wall linings, framed and frameless beam and column encasements
• Clearly communicate with management, customers and colleagues including other trades onsite
• Maintain a clean and tidy environment, appropriately disposing of waste according to site procedures
• Identify and select appropriate PPE for the task
• Install pattresses
• Install insulation
• Form service penetrations through partitions
• Install primary channels or main runners to line and level. Cut to length
• Frame and fit access panels
• Install drylining and plasterboard linings e.g. panels, plasterboards, metal sections, timber battens, wallboards, thermal boards, glass reinforced gypsum board, fixings and fittings
• Select the appropriate materials, tools and equipment for installing drylining and plasterboard linings
• Install and remove drylining systems according to manufacturers guidelines e.g. British Gypsum, Knauf, Siniat
• Form openings and junctions in accordance with drawing specifications
• Carry out repairs to dry lining and plasterboard walls and ceilings in accordance with design details, specification and manufacturers recommendations
• Form and Fix standard deflection heads in accordance with manufactures standard details
• Accurately measure and cut components
• Appropriately fix all components according to specification/drawings.
• Install different types of drylining systems e.g. Twin walls, Staggered studs, Service shaft partitions, Curved walls, Walls over 3 metres high
• Cut and fix tracks at appropriate centres according to Specification & manufactures instructions
• Apply wall coverings according to Specification & manufactures instructions
• Install door and window frames in accordance with drawings.
• Fit cover trims and skirtings in accordance with Specification & manufactures instructions
• Install glazing, blinds and manifestations to meet customer requirements
• Hang door leaf complete with ironmongery including cutting and fitting of door furniture (e.g. hinges, levers, locks, closers and signage).
• Cut and fix hangers in accordance with specification, manufacturers recommendations and FIS best practice guidlines
• Install ceiling perimeter trim to level. Ensure trims are cut to length and form internal and external corner mitres.
• Install subgrid e.g. hangers and heavy gauge channel to bridge services, heavy gauge channel between roof purlins
• Fix secondary grid / cross tees ensuring grid is square and following manufacturers recommended installation. Form upstand using cross tee and appropriate trims or channels
• Cut and install service tiles and pattresses e.g. form square and circular service cut outs through mineral tiles with plywood pattress or metal tiles and insulation pad
• Complete tiling including: Perimeter tile cuts to mineral and metal tile; tegular tile edges to mineral tile; perimeter wedges for cut metal tiles; tile clips to back of mineral ceiling tiles; insulation pads to back of metal ceiling
• Remove sections of ceiling and replace damaged grid & tile
• Measure and set out from drawings provided and check vertical and horizontal datum
• Select the appropriate materials, tools and equipment in accordance with the specification requirements and or manufacturer specific instructions
• Safely and correctly operate tools and equipment, plant and machinery appropriate for use. (e.g. scaffold, MEWPS, nail gun, circular saw, lasers)
• Apply fire and acoustic mastic seals in accordance with specification, designs details and manufacturers recommendations
• Accurately measure and cut components (e.g. metal sections, plasterboard, insulation, timber and plywood)
• Appropriately fix all components according to specifications and/or drawings
• Effectively protect surround surfaces and segregate work areas and cutting areas
• Install dry lining systems to metal and stud partitions framed wall linings, framed and frameless beam and column encasements
• Clearly communicate with management, customers and colleagues including other trades onsite
• Maintain a clean and tidy environment, appropriately disposing of waste according to site procedures
• Identify and select appropriate PPE for the task
• Install pattresses
• Install insulation
• Form service penetrations through partitions
• Install primary channels or main runners to line and level. Cut to length
• Frame and fit access panels